location server sip

location server sip


location server sip
How to set up basic NAT internet access on a Cisco PIX 7.2(2).?

I'm trying to setup basic internet access for a Cisco Pix - newb..

I think I need an access list to allow access for inside to outside? Can someone add to what I have? Thanks. :)

There are 5 statics, outside= security 100, in= security 0 - I put Xs to cover the address - the mask is /29 (248).

global (outside) 1 interface
nat (inside) 1 0.0.0.0 0.0.0.0
route outside 0.0.0.0 0.0.0.0 24.X.X.X 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout uauth 0:05:00 absolute
username superman password xxxxxxxxxxxx encrypted privilege 15
http server enable
http 192.168.1.2 255.255.255.255 inside
no snmp-server location
no snmp-server contact

Thanks!

The PIX should, with a default config, allow traffic from a lower security level (in) to a higher security level interface (out).

The access list you would need would be to allow the desired traffic back in. Its been a while...something like.. and the syntax is probably wrong... but, the concept of..

access-list inbound permit tcp any host 192.168.1.x eq www

since you have http server enabled I am guessing that you are using the gui with SDM to configure it? there is probably a point-and-click way of enabling it though that

[phpzon]location server sip, 5, Electronics[/phpzon]
[phpbay]location server sip, 30, "11211"[/phpbay]

013 Integration with External SIP server eng

mail server microsoft exchange

mail server microsoft exchange


mail server microsoft exchange
How do I find my Microsoft Exchange server and what is it?

A small window asking me to provide this info along with mail name occasionally. Whats that about? What is it and why do I get this error message?

its trying to access it to see if you have any email OR trying to send email out (BAD) in either case its a microsoft email server that companies use to send/receive email and do other things like a calendar, meeting scheduler, etc ......

you get the error message because you do not have outlook/outlook express comfigured right BUT if your not using it and not opening it (outlook/ooutlook express) I would be concerned that you have some kind of virsu/spyware

dougc

[phpbay]mail server microsoft exchange, 30, "11211"[/phpbay]
[phpzon]mail server microsoft exchange, 5, Electronics[/phpzon]

Creating Signatures and Disclaimers for Microsoft Exchange Mail